Oppmerksomhet: Alle norske bestillinger vil bli sendt av Winston VW Veteran AS (Sandnes, Norge),
så fraktkostnader er nå mye lavere og alle lokale avgifter er nå inkludert i prisen. På store karosserideler må det beregnes leveringstid, og høyere Innenlandsfrakt.
Disse delene leveres eller følger med den delen du har valgt nå, og du kan bruke disse delene til å reparere den valgte delen.
Strekkstagende innvendig side B-kvalitet
Bubble VW1200, VW1300 and VW1500 1968 (VIN 118 857 240) og senere
Karmann Ghia 1968 (VIN 148 857 240) og senere
Type 181
Specifications:
Screw thread ball joint side: M12 x 1.5
Screw thread tie rod side: M14 x 1.5 (RH) Artikkelnummer : 1327 Original VW nummer : 131415821A
Strekkstagende B-kvalitet
Bubble 1968 (VIN 118 857 240) og senere
Karmann Ghia 1968 (VIN 148 857 240) og senere
Buss 8.1967 til 7.1979
Type 3 8.1967 og senere
Type 181
Specifications:
Screw thread ball joint side: M12 x 1.5
Screw thread tie rod side: M14 x 1.5 (LH) Artikkelnummer : 1320 Original VW nummer : 311415811C
Strekkstagende B-kvalitet
Bubble 1968 (VIN 118 857 240) og senere
Karmann Ghia 1968 (VIN 148 857 240) og senere
Buss 8.1967 til 7.1979
Type 3 8.1967 og senere
Type 181
Specifications:
Screw thread ball joint side: M12 x 1.5
Screw thread tie rod side: M14 x 1.5 (RH) Artikkelnummer : 1321 Original VW nummer : 311415812C
Strekkstagende med hull for styredemper B-kvalitet
Bubble VW1200, VW1300 and VW1500 1968 (VIN 118 857 2400) og senere
Karmann Ghia 1968 (VIN 148 857 240) og senere
Type 181
Specifications:
Screw thread ball joint side: M12 x 1.5
Screw thread tie rod side: M14 x 1.5 (LH) Artikkelnummer : 1322 Original VW nummer : 131415813E
Låsemutter M12 x 1,5 (4 stk)
Bubble / Karmann Ghia /Type 181 6.1968 og senere tie rods 8.1965 og senere ball joints
Buss / Type 3 8.1967 og senere tie rod Artikkelnummer : 3133
Trekkstangmuffer (stk)
Bubble 1960 (VIN 2 921 552) og senere
Karmann Ghia (VIN 2 921 552) og senere
Buss 8.1960 og senere
Type 3 all years
Type 181 all years Artikkelnummer : 1348 Original VW nummer : 113415835, 111415837, 113415837, 311405387A
Klemmebrakett for trekkstang (stk)
Bubble
Karmann Ghia
Buss til 7.1979
Type 3
Type 181 Artikkelnummer : 4339 Original VW nummer : 111415841A, N101711, N0101711, N120082, N110182, N0110184, N120091
Delene som er nevnt her, har en nær sammenheng med den valgte delen og blir ofte bestilt sammen med den valgte delen eller søkt etter.
Tips: Hvis du ikke får et godt søkeresultat når du skriver inn et søkeord, prøv en del som har noe med det å gjøre, hvis det er en relatert fane, er den søkte delen ofte nevnt der.
Senket og 5 cm smalere foraksel
Bubble 1200-1300-1500 8.1965 og senere LHD
Karmann Ghia 8.1965 og senere LHD Artikkelnummer : 3399
Smalere torsjonsblader på akselbjelken (2 bunter med 10 blader)
Bubble VW 1200, VW 1300 and VW 1500 8.1965 og senere
Karmann Ghia 8.1965 og senere Artikkelnummer : 3388
Hvis den valgte delen ikke gjelder for din Volkswagen-type, kan du sjekke denne listen over de samme delene som passer på andre byggeår eller andre biltyper.
Smalere trekkstangssett
Bubble til 7.1965
Karmann Ghia til 7.1965
Specifications:
Length long tie rod tube: 615 mm
Length short tie rod tube: 225 mm Artikkelnummer : 3118
Tilkoblingsstangenhet venstre (justerbar)
Bubble LHD with roller Type steering til 7.1965
Karmann Ghia LHD with roller Type steering til 7.1965 Artikkelnummer : 3122 Original VW nummer : 113415801
Trekkstangmontering høyre
Bubble LHD with roller Type steering til 7.1965
Karmann Ghia LHD 1961 (VIN 3 933 185) til 7.1965 Artikkelnummer : 3123 Original VW nummer : 113415802B
Trekkstangenhet høyre B-kvalitet
Bubble VW1200, VW1300 and VW1500 LHD 1968 (VIN 118 857 240) og senere
Karmann Ghia LHD 1968 (VIN 148 857 240) og senere Artikkelnummer : 3127 Original VW nummer : 131415802E
Useful information from Paruzzi magazine and from our YouTube channel :
measuring rear wheel geometry In the previous edition of this series, we measured the wheel geometry of the front axle. In this edition, we will measure the wheel geometry of the rear axle. The adjustment of both front and rear axles will follow in the next edition.
measuring front wheel geometry In this edition, we will explain how to measure front axle wheel geometry, and what the values are for each type of classic VW. Camber Angle, Toe and Caster are discussed in this edition. Measuring the rear axle is covered in edition 28, and in edition 29 we will show how to adjust front and rear axle wheel geometry.
Caster and Toe In the previous edition, we explained what Camber and King Pin Inclination (KPI) are. An important consequence of KPI is the Scrub Radius, which is the friction radius of the front wheels. In addition to Camber and KPI, there are other important parameters, such as Caster angle and Toe.
bearings replacement When you like to repair and replace everything on your classic Volkswagen yourself, there will come a time when you will have to replace damaged bearings? Bearings are used in the steering unit, suspension, wheel axles, dynamo or alternator, among other things.
camber and King Pin The most visually striking of all wheel geometry settings, is wheel camber. We also discuss the King Pin Inclination and the Scrub radius in this article.
VW part numbering All VW parts are identified by a unique reference number. This reference is made up of 9 digits, to which sometimes a letter is added. The oldest book with VW references we could find is the one of the Beetle of 1949, Volkswagen used 6 digits to indicate the parts, from 1956 on 9 digits can be seen.
buying a VW Beetle When you want to buy a vintage car, looking at the body and the interior is not enough. Most surprises will be seen at the bottom and the chassis. Some flaws are not so bad and can be fixed with a limited budget and not too much technical knowledge. In this article we study the underside of a 1960 Volkswagen Beetle 1200.