Oppmerksomhet: Alle norske bestillinger vil bli sendt av Winston VW Veteran AS (Sandnes, Norge),
så fraktkostnader er nå mye lavere og alle lokale avgifter er nå inkludert i prisen. På store karosserideler må det beregnes leveringstid, og høyere Innenlandsfrakt.
Delene som er nevnt her, har en nær sammenheng med den valgte delen og blir ofte bestilt sammen med den valgte delen eller søkt etter.
Tips: Hvis du ikke får et godt søkeresultat når du skriver inn et søkeord, prøv en del som har noe med det å gjøre, hvis det er en relatert fane, er den søkte delen ofte nevnt der.
Rattstammeforing
Bubble til 7.1959 all models
Bubble 8.1959 til 7.1965 std model
Karmann Ghia til 7.1959 Artikkelnummer : 3370 Original VW nummer : 111415581A
Lager i rattstammen
Bubble 8.1970 og senere
Karmann Ghia 8.1970 og senere
Type 3 8.1970 og senere
Type 181 1.1971 og senere Artikkelnummer : 3469 Original VW nummer : 111953559C, 111953559A
Lagersett for rattstamme
Bubble 8.1967 til 7.1970
Karmann Ghia 8.1967 til 7.1970
Type 3 8.1967 til 7.1970
Type 181 til 12.1970 Artikkelnummer : 3470 Original VW nummer : 111953559, 111953559D, 111953561, 111953562, 111953535D
Lagersett for rattstamme
Bubble export models 8.1961 til 7.1967
Bubble standard models 8.1966 til 7.1967
Karmann Ghia 8.1961 til 7.1967 Artikkelnummer : 3471 Original VW nummer : 113415585A, 113415589A, 113415587A
Hvis den valgte delen ikke gjelder for din Volkswagen-type, kan du sjekke denne listen over de samme delene som passer på andre byggeår eller andre biltyper.
Foring rattaksel
Bubble 1975 og senere
Type 181 1974 og senere
T25/T3 buss Artikkelnummer : 1219 Original VW nummer : 171419341
Useful information from Paruzzi magazine and from our YouTube channel :
measuring front wheel geometry In this edition, we will explain how to measure front axle wheel geometry, and what the values are for each type of classic VW. Camber Angle, Toe and Caster are discussed in this edition. Measuring the rear axle is covered in edition 28, and in edition 29 we will show how to adjust front and rear axle wheel geometry.
bearings replacement When you like to repair and replace everything on your classic Volkswagen yourself, there will come a time when you will have to replace damaged bearings? Bearings are used in the steering unit, suspension, wheel axles, dynamo or alternator, among other things.
camber and King Pin The most visually striking of all wheel geometry settings, is wheel camber. We also discuss the King Pin Inclination and the Scrub radius in this article.
Caster and Toe In the previous edition, we explained what Camber and King Pin Inclination (KPI) are. An important consequence of KPI is the Scrub Radius, which is the friction radius of the front wheels. In addition to Camber and KPI, there are other important parameters, such as Caster angle and Toe.
measuring rear wheel geometry In the previous edition of this series, we measured the wheel geometry of the front axle. In this edition, we will measure the wheel geometry of the rear axle. The adjustment of both front and rear axles will follow in the next edition.
VW part numbering All VW parts are identified by a unique reference number. This reference is made up of 9 digits, to which sometimes a letter is added. The oldest book with VW references we could find is the one of the Beetle of 1949, Volkswagen used 6 digits to indicate the parts, from 1956 on 9 digits can be seen.
buying a VW Beetle When you want to buy a vintage car, looking at the body and the interior is not enough. Most surprises will be seen at the bottom and the chassis. Some flaws are not so bad and can be fixed with a limited budget and not too much technical knowledge. In this article we study the underside of a 1960 Volkswagen Beetle 1200.