If you need to upholster the seats and rear bench seat, carefully remove the old upholstery so that all welding tabs welded to the seat frame remain in good condition. After removing all the padding, there is still a bare frame whose welding tabs must be folded to remove the seat pads, and during assembly these welding tabs must be folded again to secure the seat pads. If you discover during bending the welding tabs that they offer little strength, or maybe they break, then they will have to be replaced. Before mounting, make sure that all welding tabs can be used again without breaking. If in doubt, remove the entire metal bracket and solder a new one. If you don't want to take the risk of having to start welding again when the seat frame is already painted, replace all the welding tabs in advance, then you are 100% sure that this will not cause a serious problem later.
Supplied in a set of 10 pieces, 5 with semi-circular fixing (on the seat frame tube) and 5 with straight fixing.
These welding plates are the same as the original, so the assembly is done in the same way as the original.
Useful information from Paruzzi magazine and from our YouTube channel :
Look for more technical articles on the page Paruzzi Magazine