Passar till :
Type 1 engine 1200 + 1300 8.1965 till och med 1972, 1500 + 1600 till och med 7.1970
Type 3 engine 8.1965 till och med 1972
Note:
Diaphragm is formulated with nitrile rubber to withstand modern gasoline blended with ethanol.
Produktnummer : 01659
Passar till :
Type 1 engine 1200cc (34hp) till och med 7.1965
Type 3 engine till och med 7.1965
Note:
Diaphragm is formulated with nitrile rubber to withstand modern gasoline blended with ethanol.
Produktnummer : 01658
Passar till :
Type 1 engines 8.1973 och senare
CT/CZ engines
Waterboxer engines
Produktnummer : 01668
Passar till :
Type 1 engines till och med 7.1973 except 25hp+30hp
Type 3 engines
Produktnummer : 01684
Passar till :
Type 1 engines (except 25hp+30hp)
Type 3 engines
CT/CZ engines
Waterboxer engines
Produktnummer : 01690
Passar till :
Type 1 engines except 25hp and 30hp
Type 3 engines
CT/CZ engines
Waterboxer engines
Produktnummer : 03692
Passar till :
Type 1 engines except 25hp and 30hp
Type 3 engines
CT/CZ engines
Waterboxer engines
Produktnummer : 04000
Passar till :
Fuel line on fan shroud:
Bubbla 1300, 1500 and 1600cc all years and 1200cc 8.1965 till och med 1976 (D 1 371 480)
Bus with Type 1 engine 6.1959 till och med 7.1979
Type 181 till och med 7.1970
Fuel hose:
Type 3
Right oil pump line automatic transmission:
Bubbla
Karmann Ghia
Produktnummer : 04056
Passar till :
Type 1 engines (except 25hp+30hp)
Type 3 engines
Specifications:
Cylinder outside Ø: 96 mm
Maximum stroke: 82 mm
Case stud size: M8 and M10
Full flow possibility: Yes
Produktnummer : 01655
Passar till :
Type 1 engines (except 25hp+30hp)
Type 3 engines
Specifications:
Cylinder outside Ø: 97 mm
Maximum stroke: 82 mm
Case stud size: M8 and M10
Full flow possibility: Yes
Produktnummer : 01707
Passar till :
Clutch release bearing sleeve:
Bubbla 1973 (VIN 113 2700 230) och senare
Karmann Ghia 1973 (VIN 143 2700 230) och senare
Bus 1973 (VIN 213 2194 782) och senare
Type 181 3.1973 och senare
Selector fork:
Bubbla 10.1952 till och med 7.1960
Karmann Ghia till och med 7.1960
Bus 4.1953 till och med 5.1959
Specifications:
Thread size: M7 x 1.0
Length: 16 mm
Tensile load: 8.8
Material: galvanized steel
Wrench size: 11 mm
Produktnummer : 07394