If the speed is indicated by a vibrating needle, the cable is usually about to break and it is advisable to replace it as soon as possible.
First ask yourself why the cable is damaged, it may be simple corrosion or maybe the cable is old. But it often happens that the speedo mechanism rotates with difficulty, a new cable will quickly break again. This can be checked by placing the cable on the speedo and rotating it manually, it should rotate freely.
Try to apply grease as much as possible between the inner and outer cable and make sure that the cable rotates freely without tightening. Also check the hole in the hub cap through which the cable passes, it must be square. If the square hole is worn, the cable no longer has traction, replace the hub cap if necessary.
The length of each cable is mentioned, convenient in case you need it for a Buggy, kit-car or your own design.
A number of cables are also available in a different quality, in this case, the same cable in a different quality is available in the alternative tab. If a cable is available in a higher quality, no guarantee is given for the lower quality.
Under the options tab, you will see if you need a locking ring or a cotter pin, add them to your order if necessary.
Useful information from Paruzzi magazine and from our YouTube channel :
Du hittar fler tekniska artiklar på sidan Paruzzi Magazine