Oppmerksomhet: Alle norske bestillinger vil bli sendt av Winston VW Veteran AS (Sandnes, Norge),
så fraktkostnader er nå mye lavere og alle lokale avgifter er nå inkludert i prisen. På store karosserideler må det beregnes leveringstid, og høyere Innenlandsfrakt.
Passer til: bug 1988 til 9.1992
T25/T3 buss with petrol Motorer
Defekt(er):
-Different brand
-Brand is Gauss
Hva er en ny sjanse? En reservedel er en del som har blitt returnert av en kunde og ikke lenger kan selges som ny, eller som har blitt skadet under transport. Skade eller ufullstendighet er de vanligste feilene. Feilen er beskrevet ovenfor, og bildet er en nøyaktig gjengivelse av den aktuelle delen. Klikk på det originale Paruzzi-nummeret for mer informasjon om delen og bilder av originaldelen.
Second chance-deler kan ikke returneres og har ingen form for garanti, men du får en hyggelig rabatt på nyprisen.
Useful information from Paruzzi magazine and from our YouTube channel :
Engine overhaul - video 13 replacing the crank seal During a complete engine overhaul, you will need to replace the crank seal. But replacement may also be necessary, when you discover an oil leak behind the flywheel, which will impair the operation of the clutch. We show in this video how to disassemble and reassemble the crank seal.
testing the condenser Without the condenser, the ignition will really not work properly and the contacts will burn in quickly. So it is important to measure at regular intervals if the condenser in your VW motor is still working.
crimp terminals Replacing the complete wiring loom seems the most obvious solution. We have them all in stock for every type of VW. But this is a very drastic job that you will probably only do when a total restoration is at hand. And, is it really always necessary?
measuring the coil Everyone knows that the capacitor will protect the contact points from burn-in. But what few people know is that the capacitor also plays a very important role in transforming the low voltage of the battery (6V or 12V) into a high voltage (more than 10,000V) needed to create a spark between the electrodes of the spark plug.
checking the Dwell angle There are several devices available to dynamically measure the Dwell Angle. These are usually combined devices that measure battery voltage, Dwell Angle and advance. Others can also be used to measure the CO content of exhaust gases.
measuring electric current To measure current, you must interrupt the circuit through which the current flows. The ammeter must be connected in series. Therefore, that a current clamp is a better solution. This type of ammeter does not affect the circuit to be measured, it measures the magnetic field around the conductor (induction principle, see edition 26).
the condenser explained The condenser is the most misunderstood part of the motor. What is inside that metal cylindrical part? So, what does this part actually do? Is it really necessary for the proper functioning of the engine? In this article we will limit ourselves to explaining what a capacitor is and what it does, and to measuring and testing the condenser.
6 volts and 12 volts Until the early 1970s, the VW Beetles were equipped with 6 volts in their 1200 cc version. The 1300 cc Beetle was first equipped with a 12 volt system in 1968. The VW Bus and type 3 VWs were increased to 12 volts in 1967. Types 4 are in 12 volts, as they were only introduced to the market in the late 1960s.
ignition timing - dynamic In this edition, we will adjust the ignition with the engine running, this is called a dynamic measurement. VW advises in its workshop manuals this way of adjusting all air-cooled VWs from August 1970 onwards. The static adjustment with a test bulb is then only suitable for a temporary engine adjustment on these young Volkswagens.
replacing ignition points We will discuss how to adjust the gap between the contact points, also known as the contact angle or Dwell angle. Instead of just discussing the adjustment of the contact points, we will replace them with new ones.