Del med en ny sjanse : Drop spindler trommelbrems (per par)
Oppmerksomhet: Alle norske bestillinger vil bli sendt av Winston VW Veteran AS (Sandnes, Norge),
så fraktkostnader er nå mye lavere og alle lokale avgifter er nå inkludert i prisen. På store karosserideler må det beregnes leveringstid, og høyere Innenlandsfrakt.
Passer til: Bubble til 7.1965
Karmann Ghia til 7.1965
Specifications:
Lowering: 63.5 mm
Track width difference: +12.8 mm
Defekt(er):
-
-The speedometer cable grommet is in the wrong place
-See picture with description
Hva er en ny sjanse? En reservedel er en del som har blitt returnert av en kunde og ikke lenger kan selges som ny, eller som har blitt skadet under transport. Skade eller ufullstendighet er de vanligste feilene. Feilen er beskrevet ovenfor, og bildet er en nøyaktig gjengivelse av den aktuelle delen. Klikk på det originale Paruzzi-nummeret for mer informasjon om delen og bilder av originaldelen.
Second chance-deler kan ikke returneres og har ingen form for garanti, men du får en hyggelig rabatt på nyprisen.
Useful information from Paruzzi magazine and from our YouTube channel :
the VW suspension Ferdinand Porsche came up with an ingenious concept at the beginning of the last century. A car that was built on the basis of a steel chassis plate with an independent and self-supporting body. Most of the cars from that period were built around a tubular chassis, so the Volkswagen Beetle (then still a Kdf-car) was revolutionary.
Caster and Toe In the previous edition, we explained what Camber and King Pin Inclination (KPI) are. An important consequence of KPI is the Scrub Radius, which is the friction radius of the front wheels. In addition to Camber and KPI, there are other important parameters, such as Caster angle and Toe.
measuring front wheel geometry In this edition, we will explain how to measure front axle wheel geometry, and what the values are for each type of classic VW. Camber Angle, Toe and Caster are discussed in this edition. Measuring the rear axle is covered in edition 28, and in edition 29 we will show how to adjust front and rear axle wheel geometry.
removing the MacPherson Sometimes it will be necessary to disassemble the MacPherson. It is located at the front on younger Volkswagen models such as the VW Beetles 1302 and 1303 and the VW Vanagon and at the front and rear on the VW Golf and VW 411/412. We will show how it works on a VW 1303, repair the bearings and install.
wheel play adjustment The front and rear axles of your VW are mechanical parts that have to withstand a lot of forces. They are designed to withstand the full weight of the car, but they are also designed to absorb the forces that occur during acceleration and braking, which are several times greater than the weight of the car.
independent suspension Fixed one-piece front axles with leaf springs or torsion springs as on the VW Beetle, were widely used until the end of the sixties. Due to the demand for more comfort, better steering and by driving longer distances, the independent front suspension became more and more popular on luxury cars.
measuring rear wheel geometry In the previous edition of this series, we measured the wheel geometry of the front axle. In this edition, we will measure the wheel geometry of the rear axle. The adjustment of both front and rear axles will follow in the next edition.
bearings replacement When you like to repair and replace everything on your classic Volkswagen yourself, there will come a time when you will have to replace damaged bearings? Bearings are used in the steering unit, suspension, wheel axles, dynamo or alternator, among other things.
front wheel bearing replacement If the wheel bearings are worn or damaged, there is no point in adjusting the wheel play. You will first have to replace the wheel bearings to get a good result. In edition 18 we tuned the wheel play of the front wheels to the feel, in edition 19 we fine-tuned the wheel play by using a measuring clock. In edition 21, we are replacing the front wheel bearings.
camber and King Pin The most visually striking of all wheel geometry settings, is wheel camber. We also discuss the King Pin Inclination and the Scrub radius in this article.