If you are going to mount the clutch plate it is important that you center the plate in the flywheel, if the plate is not centered correct you can not slide the engine onto the gearbox.
If you insert this guide tool through the clutch plate in the crankshaft, your clutch plate is centered the right way and you can secure the pressure plate crosswise at the right torque.
After the assembly you can pull the aligning rod out of the clutch plate, put the car in a gear and you can slide the engine smoothly onto the gearbox housing.
Useful information from Paruzzi magazine and from our YouTube channel :
Lisää teknisiä artikkeleita sivulla Paruzzi Magazine