Passar till: Bubbla 74 till och med 12.1985
Karmann Ghia 74 och senare
Bus 8.1975 till och med 7.1979
T25/T3 buss (CT/CZ)
Type 3 71 och senare square
Type 181 74 och senare
Varorna som visas här är relaterade till varandra med varan du valt och beställs eller söks ofta tillsammans.
Tips: får du ingen bra träff på sökordet du angivit så försök då att söka en vara som är relaterad till den. Finns det då en flik relaterade varor så kanske du hittar varan du sökte där.
Kopplingsvajer vingmutter
Bubbla 1965 (VIN 115 685 587) och senare
Karmann Ghia 1965 (VIN 145 685 587) och senare
Bus 1965(VIN 215 134 683) till och med 12.1982
Type 3 1965 (VIN 315 158 980) och senare
Type 181
Specifications:
Thread size: M7 Produktnummer : 907 Original VW nummer : 131721349
Kopplingens manöveraxel Ø 16 mm
Bubbla 8.1960 till och med 7.1970, 1200 1964 till och med 1971
Karmann Ghia 8.1960 till och med 7.1970
Bus 7.1959 till och med 7.1967
Type 3 till och med 7.1970
Type 181 till och med 7.1970 Produktnummer : 1528 Original VW nummer : 113141701C
Kopplingsgaffel ø 16 mm
Bubbla 1300-1302 8.1970 till och med 1971
Karmann Ghia 8.1970 till och med 1971
Type 3 8.1970 till och med 8.1971
Type 181 8.1970 till och med 7.1971 Produktnummer : 1526 Original VW nummer : 113141701E
Kopplingsgaffel ø 20 mm
Bubbla 1200 1972 till och med 12.1985, 1300-1303 1971 och senare
Karmann Ghia 1971 och senare
Type 3 9.1971 och senare
Type 181 8.1971 och senare Produktnummer : 1529 Original VW nummer : 113141701F
Kopplingens returfjäder för manöveraxeln
Bubbla:
export models 8.1960 till och med 1964 (VIN 115 245 529)
all models 1964 (VIN 115 247 529) till och med 1971 (VIN 112 2070 812)
Karmann Ghia:
8.1960 till och med 1971 (VIN 142 2070 812)
Bus:
6.1959 till och med 7.1975
Type 3:
till och med 1971 (VIN 312 2016 037)
Type 181:
till och med 7.1971 Produktnummer : 1533 Original VW nummer : 113141723
Kopplingens returfjäder för manöveraxeln
Bubbla 1971 (VIN 112 2070 813) till och med 1974 (VIN 114 2663 259)
Karmann Ghia 1971 (VIN 142 2070 813) och senare
Type 3 1971 (VIN 312 2016 038) och senare
Type 181 8.1971 till och med 1974 (VIN 184 2695 786) Produktnummer : 1531 Original VW nummer : 113141723C
Kopplingens returfjäder för manöveraxeln
Bubbla 1974 (VIN 114 2663 260) till och med 12.1985
Type 181 1974 (VIN 184 2695 787) och senare Produktnummer : 1534 Original VW nummer : 113141723D
Monteringssats för kopplingens drivaxel (Ø 16 mm)
Bubbla 8.1960 till och med 1971 (VIN 112 2070 812) + 1.1986 och senare
Karmann Ghia 8.1960 till och med 1971 (VIN 142 2070 812)
Bus 6.1959 till och med 7.1975
Type 3 till och med 8.1971
Type 181 till och med 7.1971 Produktnummer : 1527 Original VW nummer : 113141723, N124201, N0124201, 113141717A, 113141271A, 113141707A
Kopplingsgaffel monteringssats uretan 16 mm
Bubbla 8.1960 till och med 1971 (VIN 112 2070 812) + 1.1986 och senare
Karmann Ghia 8.1960 till och med 1971 (VIN 142 2070 812)
Bus 6.1959 till och med 7.1975
Type 3 till och med 8.1971
Type 181 till och med 7.1971 Produktnummer : 1524 Original VW nummer : 113141723, N124201, 113141717A,
Bussningssats för kopplingsaxel i brons Ø 20 mm
Bubbla 1971 (VIN 112 2070 813) till och med 12.1985
Karmann Ghia 1971 (VIN 142 2070 813)
Bus 8.1975 och senare (the spring is not useable)
Type 3 9.1971 och senare
Type 181 8.1971 och senare Produktnummer : 1525 Original VW nummer : 113141707C, 113141711A, 113141717A, N0124201, 113141723D
Ifall varan du valt inte är tillämpningsbar på denna typ Volkswagen, finns alternativ med liknande varor som passar på andra årsmodeller eller andra fordonsmodeller.
Kopplingsgaffel hävarm 16 mm
Bubbla 1965 till och med 1971
Karmann Ghia 1965 till och med 1971
Bus 1965 till och med 7.1975
Type 3 1965 till och med 1971
Type 181 till och med 7.1971 Produktnummer : 1550 Original VW nummer : 131141719
Kopplingsgaffel hävarm 16 mm
Bubbla 1965 till och med 1971
Karmann Ghia 1965 till och med 1971
Bus 1965 till och med 7.1975
Type 3 1965 till och med 1971
Type 181 till och med 7.1971 Produktnummer : 1550 Original VW nummer : 131141719
Kopplingsgaffel hävarm 16 mm
Bubbla 1965 till och med 1971
Karmann Ghia 1965 till och med 1971
Bus 1965 till och med 7.1975
Type 3 1965 till och med 1971
Type 181 till och med 7.1971 Produktnummer : 1550 Original VW nummer : 131141719
Kopplingsgaffel hävarm 16 mm
Bubbla 1965 till och med 1971
Karmann Ghia 1965 till och med 1971
Bus 1965 till och med 7.1975
Type 3 1965 till och med 1971
Type 181 till och med 7.1971 Produktnummer : 1550 Original VW nummer : 131141719
Kopplingsgaffel hävarm 16 mm
Bubbla 1965 till och med 1971
Karmann Ghia 1965 till och med 1971
Bus 1965 till och med 7.1975
Type 3 1965 till och med 1971
Type 181 till och med 7.1971 Produktnummer : 1550 Original VW nummer : 131141719
Kopplingsgaffel hävarm 16 mm
Bubbla 1965 till och med 1971
Karmann Ghia 1965 till och med 1971
Bus 1965 till och med 7.1975
Type 3 1965 till och med 1971
Type 181 till och med 7.1971 Produktnummer : 1550 Original VW nummer : 131141719
Useful information from Paruzzi magazine and from our YouTube channel :
Engine diagnostics - video 02 rockers and rocker arm In video fourteen of our engine overhaul video series, we disassembled and reassembled the rocker arms and rocker shaft. We will diagnose the rocker arms and rocker shaft in this video. Additional attention will be paid to the adjusting screws and adjusting nuts.
oil leakage If you are planning to buy a classic Volkswagen, you will certainly take a look under the engine lid and under the car. If it's dirty both at the bottom and under the bonnet, it doesn't offer much trust. The engine will need a lot of attention in the coming weeks, but how bad is it?
Engine overhaul - video 14 rockers and pushrods In this video we will show how to disassemble and reassemble the rocker arms and pushrods. We will discuss the diagnosis of the rockers and pushrods in our other video series, which deals with engine diagnosis. How to adjust the rockers, an action also known as shimming, can be seen in our video series on engine adjustment.
Engine overhaul - video 13 replacing the crank seal During a complete engine overhaul, you will need to replace the crank seal. But replacement may also be necessary, when you discover an oil leak behind the flywheel, which will impair the operation of the clutch. We show in this video how to disassemble and reassemble the crank seal.
Engine overhaul - video 06 find the TDC compression stroke We will explain in this video how to determine the top dead center, as well as which of the two top dead center moments is this one from the compression stroke. This is important in order to properly position the distributor drive shaft. Properly understanding how a four-stroke engine works is essential when you begin an engine overhaul.
Engine Overhaul - video 01 video series preview In this video, we will give an overview of the most important steps during the engine overhaul of a type 1 air-cooled Volkswagen engine. Each step will be discussed in a separate video. We will show special tools and even homemade tools to help the enthusiast perform their engine overhaul.
Engine overhaul - video 05 install the distributor drive shaft This is the continuation of video 04, we are now going to install the distributor drive shaft, both on an already rebuilt Volkswagen Type 1 engine and on a split Type 1 crankcase. We pay a lot of attention to the correct positioning of the drive shaft at the beginning of this video series, because it is crucial to be able to adjust the ignition properly, later, when the engine is overhauled.
Engine overhaul - video 04 removing the distributor drive shaft We want to give extra attention in this video to the position of the distributor drive shaft of the VW Type 1 engines, . If the drive shaft of the distributor is not correctly mounted during the engine overhaul, problems can arise later with the adjustment of the ignition timing. Disassembling the drive shaft is then the only solution.
Engine overhaul - video 12 the flywheel In this video, we'll explain how to disassemble and assemble the flywheel, and what tools you'll need to do so. To disassemble the flywheel, you will need to unscrew the gland nut. This nut is attached with a torque of 350 Nm, it will require some force to loosen.
Engine overhaul - video 16 part 1 valves removal In this first part of video 16, we disassemble cylinder head valves and valve springs. In the first part, we start by demonstrating the tools and techniques used, and disassemble the valves of a relatively new cylinder head.