Sopii malleihin: TYP-1 Kupla 74-12.1985
Karmann Ghia 74 ja uudemmat
Bussi 8.1975-7.1979
TYP-2 T25 / T3 Tölkki (CT / CZ)
TYP-3 71 ja uudemmat square
TYP 181 74 ja uudemmat
Näitä tuotteita tilataan usein samalla kuin valitsemaasi tuotetta. Vihje: jos et löydä etsimääsi tuotetta, hae hakusanalla joka joka liittyy jollain tavalla osakokonaisuuteen, ja tarkastele tässä esiteltäviä liitännäisiä tuotteita.
Kytkinvaijerin siipimutteri
TYP-1 Kupla 1965 (VIN 115 685 587) ja uudemmat
Karmann Ghia 1965 (VIN 145 685 587) ja uudemmat
Bussi 1965(VIN 215 134 683)-12.1982
TYP-3 1965 (VIN 315 158 980) ja uudemmat
TYP 181
Kytkimen käyttöakseli Ø 20 mm
TYP-1 Kupla 1200 1972-12.1985, 1300-1303 1971 ja uudemmat
Karmann Ghia 1971 ja uudemmat
TYP-3 9.1971 ja uudemmat
TYP 181 8.1971 ja uudemmat Tuotenumero : 1529 Alkuperäinen VW-numero : 113141701F
Kytkinhaarukan asennussarja, Ø20 mm
TYP-1 Kupla 1971 (VIN 112 2070 813)-12.1985
Karmann Ghia 1971 (VIN 142 2070 813)
Bussi 8.1975 ja uudemmat (the spring is not useable)
TYP-3 9.1971 ja uudemmat
TYP 181 8.1971 ja uudemmat Tuotenumero : 1525 Alkuperäinen VW-numero : 113141707C, 113141711A, 113141717A, N0124201, 113141723D
Jos valittu osa ei sovi valitsemaasi VW-tyyppiin, tarkastele tältä listalta vastaavia osia jotka sopivat muihin vuosimalleihin tai muihin VW-tyyppeihin.
Useful information from Paruzzi magazine and from our YouTube channel :
Engine overhaul - video 17 assemble cylinder heads In this video, we show you how to assemble the cylinder heads of a VW Type 1 engine, and what to pay particular attention to.
Engine overhaul - video 03 the workshop We show in this video what the possibilities are to work on your VW engine. If you plan to overhaul several engines, then buying a professional engine stand is recommended. If you only want to overhaul the engine of your own classic Volkswagen, then buying special tools is not cost effective. We will show all options.
oil seals All rotating parts fitted with bearings lubricated by oil or grease, such as crankshafts, transmission shafts, drive shafts, steering rods, etc., must be sealed. In our classic VW's we find two types of oil seals, namely the static and the dynamic (lip seal) oil seals.
Engine diagnostics - video 04 part 1 valves and valve springs In video 16 of the engine overhaul series, we disassembled the valves and valve springs.
Not all of the cylinder heads we showed were in good condition, this does not mean that all parts need to be replaced. After a thorough diagnosis, it will show if the valves and valve springs are still reusable. This video discusses valve and valve spring diagnosis. It consists of four parts.
Engine overhaul - video 14 rockers and pushrods In this video we will show how to disassemble and reassemble the rocker arms and pushrods. We will discuss the diagnosis of the rockers and pushrods in our other video series, which deals with engine diagnosis. How to adjust the rockers, an action also known as shimming, can be seen in our video series on engine adjustment.
Engine diagnostics - video 02 rockers and rocker arm In video fourteen of our engine overhaul video series, we disassembled and reassembled the rocker arms and rocker shaft. We will diagnose the rocker arms and rocker shaft in this video. Additional attention will be paid to the adjusting screws and adjusting nuts.
oil consumption Oil leaks are easy to rectify, sometimes even without having to remove the motor. We have saved the more difficult cases for this article, so we did not call this "oil leaks part 2" but "oil consumption". The distinction between the two is sometimes difficult to make, hopefully the information that follows will bring clarity.
Engine overhaul - video 16 part 1 valves removal In this first part of video 16, we disassemble cylinder head valves and valve springs. In the first part, we start by demonstrating the tools and techniques used, and disassemble the valves of a relatively new cylinder head.
Engine diagnostics - video 03 pushrods In video fourteen of our series on engine overhaul, we disassembled and reassembled the rocker arms and pushrods. In this video, we will inspect the pushrods. The result of this diagnosis, will tell us if we can reinsert the pushrods, or if we need to replace them.